Grout Tie Pinning Nozzle
The Grout tie pinning nozzle is attached to the professional grade grout gun via a GTPN Collett
It is used for inserting grout and grouted ties deep into pilot holes.
The pinning nozzle can be inserted into pilot holes of 14/16mm diameter depending on the length of tie.
The longer the tie, the wider the required pilot hole.
The grout tie is generally used when the when a vertical crack is within 500mm of 2 abutting walls and it is beneficial not to damage mortar or plasterwork by the cutting of slots to allow fitting of the reinforcement.
The tie is installed through a 14/16mm pilot hole, minimising visible signs of installation.
Throwaway Plastic, Reusable Stainless Steel