StrucSol Diffusion D.P.C
Diffusion D.P.C has been developed to reduce the reliance on high pressure pumping equipment to insert a chemical D.P.C.
Diffusion D.P.C is delivered into the damp wall via a series of 10mm diameter holes drilled at 150mm spacings 150mm above ground.
Diffusion is pumped into the pre drilled holes via a simple calking gun, or a hand pump where large volumes are required.
A reservoir of Diffusion is left in the drilled hole , over a short period of time the treatment dispersant into the porous materials of the wall, the material sets, forming a moisture impervious barrier,
The diffusion barrier prevents further passage of moisture from below ground entering into the superstructure.
Diffusion is available in :
1000 ml Cartridge
5000ml Bulk Pack