Timber Frame Wall tie
The Strucsol timber frame wall tie is available in lengths to suit cavity up to 300mm wide.
The tie is easily installed using a hand held support tool.
the support tool is cut to length to ensure consistent penetration into the inner timber frame.
The protruding section of the tie is then bonded into the mortar of the brickwork.
The Unique high fin profile of the Timber Frame tie, ensures maximum pull out strength.
The timber frame tie easily exceed minimum performance requirements even in the poorest quality timber.
The small cross sectional area ensures minimal heat loss through the insulating material.
the tie can be provided with an Insulation support disk, designed to hold the insulation firm against the timber frame leaving the open part of the cavity clear and unbridged.