Timber Frame Wall tie

  • Description

The Strucsol timber frame wall tie is available in lengths to suit cavity up to 300mm wide.

The tie is easily installed using a hand held support tool.

the support tool is cut to length to ensure consistent penetration into the inner timber frame.

The protruding section of the tie is then bonded into the  mortar of the brickwork.

The Unique high fin profile of the Timber Frame tie, ensures maximum pull out strength.

The timber frame tie easily exceed minimum performance requirements even in the poorest quality timber.

The small cross sectional area ensures minimal heat loss through the  insulating material.

the tie can be provided with an Insulation support disk, designed to hold the insulation firm against the timber frame leaving the open part of the cavity clear and unbridged.

sold in packs of 100 ties

Download Product Data Sheet


Earn 0 reward points with this purchase
Add This Product To Your Wishlist
Buy This Now
£0.00 £0.00


Timber Tie Install tool: £58.00
You May Also Like